SNAR54 PS2 Remote Control 4DOF 3D Robot Arm Kit Installation Tutorial
1. Test the steering gear works normally 2. Install the robotic arm 3. Debug Debugging pays attention
1. Test the steering gear works normally 2. Install the robotic arm 3. Debug Debugging pays attention
connection: 18650 battery box red wire to l298n 12v, black wire to L298N GND first: install the
Screen and 8266 wiring: GND---GND; VCC---5V; SDA---D14/SDA; SCL---D15/SCL HX711 and 8266: GND---GND; VCC---3.3V; DT---D7; SCK---D6; Scale connected
The temperature and humidity of the library and code are the same as that of uno, except
1. 2. 3. 4. 5. 6. 注
1.All parts 1.1 Connect the products shown below 1.2 Install as shown in the picture 2.Take out
https://v.smallhammer.cc/3D-print/3D2%20%E6%B1%BD%E8%BD%A6%E6%89%8B%E5%8A%A8%E6%8C%A1%E5%8F%98%E9%80%9F%E7%AE%B1.mp4
https://img.small-hammer.com/2019/07/4dof%E6%9C%BA%E6%A2%B0%E8%87%82%E8%80%81%E5%A4%96%E6%BC%94%E7%A4%BA%E8%A7%86%E9%A2%91.mp4
lib/HX711.zip
connect power to the board connect 6 pieces servo to board code download download link copy libray PS2X_lib to C:\Program