1. Home
  2. Docs
  3. SNAM6500 Knob Upgrade 6dof Robot Arm
  4. 1. Test that all servos work properly

1. Test that all servos work properly

1. Plug the arduino uno board and the potentiometer extension board together, as shown in the figure

2. Insert the adapter into the DC hole above.

3. Insert the servos into the expansion board s1-s6 in turn.

Pay attention to the positive and negative poles of the servo,

Yellow-signal

Brown- +

Black-negative

“Related information on servos”

Was this article helpful to you? Yes No 1

Leave A Comment