After power on, hold the left rocker, press the reset key of the control panel, and release the left rocker (usually about 5 seconds) after the light goes out, and enter the recording mode. In recording mode, after each action, press the left rocker to record the action. When all the actions are recorded, click on the rocker to complete the recording and start playing (see the video demonstration if you don’t understand).
SNAR23 Instructions for 4-DOF Telecontrol Manipulator
- Home
- Docs
- SNAR23 Instructions for 4-DOF Telecontrol Manipulator
- 3.Operation guide
- 3.2Recording, Braking and Playing