Story background

Ten years ago, I came into contact with the globally popular robotic arm alarm, but the installation was particularly troublesome. It may take four hours to complete the installation, and most of my learning time was wasted on installation. That’s why I came up with the idea of developing a robotic arm that is easy to install. Our product uses 3D printing technology, and the part of the arm that needs to be screwed on at the right angle has been integrated, greatly reducing the overall installation time. It can even be installed in 30 minutes. This way, you can have more time to learn difficult programming and control skills. I hope my design can help more friends quickly learn robot knowledge.



Product Introduction:

This is a robotic arm produced using 3D printing technology, using 6 SG90 servos. The design is reasonable, the structure is stable, and it is easy to install.




The maximum arm length is about 21cm

The maximum height is about 26cm



Product features:


3D printing production

The servo motor has 6 sg90 units

Simple and fast installation



1.3D printing production, there may be burrs, please be cautious if you mind

2. For scattered shipments that require assembly, please be cautious when placing orders with poor manual skills


Shipping list:

1 set of 3D printed parts

6 sg90 servos