MakerBuying 4dof aluminum robot arm DIY robotic claw arduino kit SNAM5300

Description

manual:https://www.makerbuying.com/docs/snam5300

Product description

This is a 4dof metal manipulator with a powerful mg996 large steering gear. The robotic arm has claws that can grab something. Each steering gear can move 180 degrees and the angle of motion is relatively large.
The internationally-used arduino is used as the control board, and our exclusive potentiometer knob control board is used to control the four servos. The threshold is very low.
We provide program downloads, and the program has been written before the product is shipped.

Features:
*
Aluminium alloy is relatively strong
*
Mg996 steering gear, the power is relatively large
*
Arduino control, globally
*
Four knob controls, using a low threshold
*
Distribution power adapter

Assembled: We provide online webpage assembly tutorials and videos in Chinese and English, and continue to update and maintain.

Power: Use our 5V2A adapter driver, or use our USB to DC adapter cable to power your own powerbank. powerbank requires a minimum of 2A current output.

Program: The program has been burned at the factory, and the source code of the program is provided.

Welding: We have welded parts in our tutorial.

Product List:
1. A set of metal parts with screws
2.4 mg996 servos
3. An arduino Chinese board
4. One potentiometer expansion board kit (requires welding)
5. A 5V2A US standard adapter
6. A USB to DC power cord

Product parameters:
Model: SNAM5300
Weight: 840g
Packing type: aircraft box
Product size: 14.5X9.5X14CM
Maximum extension length of the arm: 23cm
Maximum opening size of the clip: 7.5cm
Packing size: 20.5*13*6CM

Note: Shipment is shipped as spare parts, need to be assembled, expansion board needs to be welded